Modal identification of a 5-story RC building tested on the NEES-UCSD shake table

Rodrigo Astroza, Hamed Ebrahimian, Joel P. Conte, Jose I. Restrepo, Tara C. Hutchinson

Research output: Contribution to conferencePaper

1 Scopus citations


A full scale five-story reinforced concrete building was built and tested on the NEES-UCSD shake table. The purpose of this experimental program was to study the response of the structure and nonstructural systems and components (NCSs) and their dynamic interaction during seismic excitation of different intensities. The building specimen was tested under base-isolated and fixed-based conditions. In the fixed-based configuration the building was subjected to a sequence of earthquake motion tests designed to progressively damage the structure. Before and after each seismic test, ambient vibration data were recorded and additionally, low amplitude white noise base excitation tests were conducted at key stages during the test protocol. A quasi-linear response of the building can be assumed due to the low intensity of the excitation and consequently modal parameters might change due to the structural and nonstructural damage. Using the vibration data recorded by 72 accelerometers, three system identification methods, including two output-only (SSI-DATA and NExT-ERA) and one input-output (DSI), are used to estimate the modal properties of the fixed-base structure at different levels of structural and nonstructural damage. Results allow comparison of the identified modal parameters obtained by different methods as well as the performance of these methods and studying the effect of the structural and nonstructural damage on the dynamic parameters. The results show that the modal properties obtained by different methods are in good agreement and that the effect of structural/nonstructural damage is clearly evidenced via the changes induced on the estimated modal parameters of the building.
Original languageAmerican English
Number of pages9
StatePublished - 3 Sep 2013
EventConference Proceedings of the Society for Experimental Mechanics Series -
Duration: 1 Jan 2020 → …


ConferenceConference Proceedings of the Society for Experimental Mechanics Series
Period1/01/20 → …


  • Full-scale specimen
  • Non-structural components
  • Shake table test
  • Structural damage
  • System identification

Fingerprint Dive into the research topics of 'Modal identification of a 5-story RC building tested on the NEES-UCSD shake table'. Together they form a unique fingerprint.

Cite this