Corrigendum to “Elemental sulfur-based autotrophic denitrification in stoichiometric S0/N ratio: Calibration and validation of a kinetic model” [Bioresour. Technol. 307 (2020) 123229] (Bioresource Technology (2020) 307, (S0960852420305009), (10.1016/j.biortech.2020.123229))

C. Huiliñir; L. Acosta; D. Yanez; S. Montalvo; G. Esposito; G. Retamal; G. Levicán; L. Guerrero

doi:10.1016/j.biortech.2021.126445

Corrigendum to “Elemental sulfur-based autotrophic denitrification in stoichiometric S0/N ratio: Calibration and validation of a kinetic model” [Bioresour. Technol. 307 (2020) 123229] (Bioresource Technology (2020) 307, (S0960852420305009), (10.1016/j.biortech.2020.123229))

C. Huiliñir^*, L. Acosta, D. Yanez, S. Montalvo, G. Esposito, G. Retamal, G. Levicán, L. Guerrero

^*Corresponding author for this work

Research output: Contribution to journal › Comment/debate

Abstract

The authors made typographical errors on the manuscript. The mistakes are: Page 8: The units of the parameter a* must be dm²/mg, not dm²/g. Table five: The parameter k₁ and μ_max,2 (values calibrated) are wrong. Currently the table shows: Table 5. Calibrated model parameters values obtained, with their confidence interval (CI). [Table presented] It must be: Table 5. Calibrated model parameters values obtained, with their confidence interval (CI). [Table presented] The authors would like to apologise for any inconvenience caused.

Original language	English
Article number	126445
Journal	Bioresource Technology
Volume	347
DOIs	https://doi.org/10.1016/j.biortech.2021.126445
State	Published - Mar 2022
Externally published	Yes

Bibliographical note

Publisher Copyright:
© 2020 Elsevier Ltd

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1016/j.biortech.2021.126445

Fingerprint

Dive into the research topics of 'Corrigendum to “Elemental sulfur-based autotrophic denitrification in stoichiometric S0/N ratio: Calibration and validation of a kinetic model” [Bioresour. Technol. 307 (2020) 123229] (Bioresource Technology (2020) 307, (S0960852420305009), (10.1016/j.biortech.2020.123229))'. Together they form a unique fingerprint.

Cite this

Huiliñir, C., Acosta, L., Yanez, D., Montalvo, S., Esposito, G., Retamal, G., Levicán, G., & Guerrero, L. (2022). Corrigendum to “Elemental sulfur-based autotrophic denitrification in stoichiometric S0/N ratio: Calibration and validation of a kinetic model” [Bioresour. Technol. 307 (2020) 123229] (Bioresource Technology (2020) 307, (S0960852420305009), (10.1016/j.biortech.2020.123229)). Bioresource Technology, 347, Article 126445. https://doi.org/10.1016/j.biortech.2021.126445

Huiliñir, C. ; Acosta, L. ; Yanez, D. et al. / Corrigendum to “Elemental sulfur-based autotrophic denitrification in stoichiometric S0/N ratio : Calibration and validation of a kinetic model” [Bioresour. Technol. 307 (2020) 123229] (Bioresource Technology (2020) 307, (S0960852420305009), (10.1016/j.biortech.2020.123229)). In: Bioresource Technology. 2022 ; Vol. 347.

@article{fdde92cf0d5a4682a2be160ff546807b,

title = "Corrigendum to “Elemental sulfur-based autotrophic denitrification in stoichiometric S0/N ratio: Calibration and validation of a kinetic model” [Bioresour. Technol. 307 (2020) 123229] (Bioresource Technology (2020) 307, (S0960852420305009), (10.1016/j.biortech.2020.123229))",

abstract = "The authors made typographical errors on the manuscript. The mistakes are: Page 8: The units of the parameter a* must be dm2/mg, not dm2/g. Table five: The parameter k1 and μmax,2 (values calibrated) are wrong. Currently the table shows: Table 5. Calibrated model parameters values obtained, with their confidence interval (CI). [Table presented] It must be: Table 5. Calibrated model parameters values obtained, with their confidence interval (CI). [Table presented] The authors would like to apologise for any inconvenience caused.",

author = "C. Huili{\~n}ir and L. Acosta and D. Yanez and S. Montalvo and G. Esposito and G. Retamal and G. Levic{\'a}n and L. Guerrero",

note = "Publisher Copyright: {\textcopyright} 2020 Elsevier Ltd",

year = "2022",

month = mar,

doi = "10.1016/j.biortech.2021.126445",

language = "English",

volume = "347",

journal = "Bioresource Technology",

issn = "0960-8524",

publisher = "Elsevier Ltd.",

}

Huiliñir, C, Acosta, L, Yanez, D, Montalvo, S, Esposito, G, Retamal, G, Levicán, G & Guerrero, L 2022, 'Corrigendum to “Elemental sulfur-based autotrophic denitrification in stoichiometric S0/N ratio: Calibration and validation of a kinetic model” [Bioresour. Technol. 307 (2020) 123229] (Bioresource Technology (2020) 307, (S0960852420305009), (10.1016/j.biortech.2020.123229))', Bioresource Technology, vol. 347, 126445. https://doi.org/10.1016/j.biortech.2021.126445

Corrigendum to “Elemental sulfur-based autotrophic denitrification in stoichiometric S0/N ratio: Calibration and validation of a kinetic model” [Bioresour. Technol. 307 (2020) 123229] (Bioresource Technology (2020) 307, (S0960852420305009), (10.1016/j.biortech.2020.123229)). / Huiliñir, C.; Acosta, L.; Yanez, D. et al.
In: Bioresource Technology, Vol. 347, 126445, 03.2022.

Research output: Contribution to journal › Comment/debate

TY - JOUR

T1 - Corrigendum to “Elemental sulfur-based autotrophic denitrification in stoichiometric S0/N ratio

T2 - Calibration and validation of a kinetic model” [Bioresour. Technol. 307 (2020) 123229] (Bioresource Technology (2020) 307, (S0960852420305009), (10.1016/j.biortech.2020.123229))

AU - Huiliñir, C.

AU - Acosta, L.

AU - Yanez, D.

AU - Montalvo, S.

AU - Esposito, G.

AU - Retamal, G.

AU - Levicán, G.

AU - Guerrero, L.

PY - 2022/3

Y1 - 2022/3

N2 - The authors made typographical errors on the manuscript. The mistakes are: Page 8: The units of the parameter a* must be dm2/mg, not dm2/g. Table five: The parameter k1 and μmax,2 (values calibrated) are wrong. Currently the table shows: Table 5. Calibrated model parameters values obtained, with their confidence interval (CI). [Table presented] It must be: Table 5. Calibrated model parameters values obtained, with their confidence interval (CI). [Table presented] The authors would like to apologise for any inconvenience caused.

AB - The authors made typographical errors on the manuscript. The mistakes are: Page 8: The units of the parameter a* must be dm2/mg, not dm2/g. Table five: The parameter k1 and μmax,2 (values calibrated) are wrong. Currently the table shows: Table 5. Calibrated model parameters values obtained, with their confidence interval (CI). [Table presented] It must be: Table 5. Calibrated model parameters values obtained, with their confidence interval (CI). [Table presented] The authors would like to apologise for any inconvenience caused.

UR - http://www.scopus.com/inward/record.url?scp=85120488665&partnerID=8YFLogxK

U2 - 10.1016/j.biortech.2021.126445

DO - 10.1016/j.biortech.2021.126445

M3 - Comment/debate

C2 - 34863607

AN - SCOPUS:85120488665

SN - 0960-8524

VL - 347

JO - Bioresource Technology

JF - Bioresource Technology

M1 - 126445

ER -

Huiliñir C, Acosta L, Yanez D, Montalvo S, Esposito G, Retamal G et al. Corrigendum to “Elemental sulfur-based autotrophic denitrification in stoichiometric S0/N ratio: Calibration and validation of a kinetic model” [Bioresour. Technol. 307 (2020) 123229] (Bioresource Technology (2020) 307, (S0960852420305009), (10.1016/j.biortech.2020.123229)). Bioresource Technology. 2022 Mar;347:126445. doi: 10.1016/j.biortech.2021.126445

Corrigendum to “Elemental sulfur-based autotrophic denitrification in stoichiometric S0/N ratio: Calibration and validation of a kinetic model” [Bioresour. Technol. 307 (2020) 123229] (Bioresource Technology (2020) 307, (S0960852420305009), (10.1016/j.biortech.2020.123229))

Abstract

Bibliographical note

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this